Posts Tagged ‘Hard’
2002 Volvo S40 That Is Hard To Start. Must Use The Gas Pedal To Get Started, Won’t Start By Just Turning Key.
In: Volvo
27 Feb 2010Already had new battery and alternator put in.
hey man i hate to say it but everybody who just answered your question was a little bit or completely wrong,i am a volvo technican and we do not charge the customer to take the complete dash out of the vehicle at least not a volvo dealership that know what there doing and honestly it [...]
How Hard Is It To Find Replacement Parts (tune Up Stuff) For Older Honda Motorcycles?
In: Honda
17 Feb 2010A friend of mine said that replacement parts (Tune up stuff) for older Honda motorcycles was not available any more. That sounds wrong to me. I want to find out before i buy one! FYI probably an 1985 or newer model 250 cc
- (6) Comments
- Tags: Find, Hard, honda, Motorcycles, Older, Parts, Replacement, Stuff, Tune
Where Are The Truck Dealers On Hard Truck 18 Wheels Of Steel Across America? I Want To Get The Volcano Truck?
In: Uncategorized
12 Feb 2010i would like to know where a truck dealer for the volcano truck is on hard truck 18 wheels of steel across america thanks!!!!!!
Where Are The Truck Dealers On Hard Truck 18 Wheels Of Steel Across America? I Want To Get The Volcano Truck?
In: Uncategorized
12 Feb 2010i would like to know where a truck dealer for the volcano truck is on hard truck 18 wheels of steel across america thanks!!!!!!
Where Are The Truck Dealers On Hard Truck 18 Wheels Of Steel Across America? I Want To Get The Volcano Truck?
In: Uncategorized
12 Feb 2010i would like to know where a truck dealer for the volcano truck is on hard truck 18 wheels of steel across america thanks!!!!!!
i have a focus svt. i posted a question asking what would cause it. the answers were brake booster, master cylinder, vacuum leak. the first dealer that i took it too, duplicated my problem, turned the rotors, put new pads on it. that solved nothing. they again duplicated the problem but told me there was [...]
1997 Ford Ranger V6 2wd Oil Pan Gasket Change? How Hard Is It? Does The Engine Have To Be Lifted Up It Off?
In: Ford
4 Feb 2010This will give you all you need to know.http://www.chiltondiy.com/
Does It Upset You When People Get Things That They Don’t Work Hard For And Then They Don’t Even Appreciate It?
In: Cars
3 Feb 2010My sister, who is 3 years younger than me, has always had this perpetual silver spoon in her mouth. From the time she was little she has done everything from crying until she vomits (ick) to becoming hysterical to get her way. Why my parents gave in, I don’t know. But she [...]
Good looking, 55 yr. old VP of construction firm.
He has everything he needs or wants!
He drinks beer (only) and smokes cigars but only a certain kind (gift baskets with various types are not an option – I’ve tried).
He restored a car, but it’s perfected and nothing I could know is needed. (’57 Bel Aire)
He [...]
I was told I had to unbolt motor mount , lift motor to remove oil pan,front of gasket is blown out, but still atached. why?pcv looks good. could presure buildup be coming from other source? or bad gasket,or installed wrong? thanks!
I Have Truck Suburbun 1997 , Hard To Start Since Some Time , I Have Changed The Fuel Filter And Sparking Plug
In: Trucks
31 Jan 2010and cleaned injection system by chimical cerculation .. good battery . non of above is help to remove the problem .
what i am doing now , fill embty bottel of water with petrol and with little syring i take some petrol and poure it inside the engin . the car start imidiatly , but that [...]
1988 volvo penta boat motor hard start but after running will start fine rest of day. Till yesterday it shut down. Points and cap are good, not sure about gas pump. the filter has little gas in it even when running. I pulled the rubber hose off carb and cranked but no gas. it aslso [...]
its a 6 cylinder. what all needs to be done to access the spark plugs on the firewall side?
How Do I Fit Mud Flaps To My Ford Puma And How Hard Is It To Do?
In: Ford
22 Jan 2010Its very easy to do, the way of fitting them depends on the sort of flaps you are fitting. If they are original ford flap, all you need to is remove the bolts that are already fitted to the car. Pass the bolts through the new flaps and re-attach them to the car.
If they are [...]
- (1) Comment
- Tags: Flaps, Ford, Hard, Puma
Toyota Hard To Start?
In: Toyota
18 Jan 2010i just bought a 1990 toyota corolla and one of its problems is that it doesnt want to start when its been sitting for a while. this has nothing to do with the weather, as when its 80 f outside it still wont start as long as its sat for about 6 hours. anyways, i [...]
- (3) Comments
- Tags: Hard, Start., Toyota
Why Is My 1988 Toyota Pickup With A 22 Re Having A Hard Time Starting Cold Or Warm?
In: Toyota
18 Jan 2010I have replace the spark plugs, the distributor cap and rotor, I have cleaned my fuel injectors. It seems the longer it sits in between driving the harder it is to start. The only thing left is to clean the whole entire fuel system or replace the fuel pump anybody have any other [...]
Can anyone give me information on how to change the transmission fluid in a 2000 Mercury Cougar? I have changed transmission fluid before in a rear wheel drive car but never in a front wheel drive car. How hard is it and can someone tell me where i can find instructions for this type of [...]
- (3) Comments
- Tags: 2000, Change, Cougar, Fluid, Hard, Mercury, Transmission
What Color Is The Wire For Power When Hard Wiring A Radio For A 1995 Mercury Villager?
In: Mercury
2 Jan 2010Have too many wires know what some go to but not sure which wire is the power. Does anyone know what color that would be in a 1995 Mercury Villager?
What Is Causing My Clutch To Intermittently Become Stiff And Hard To Push In?
In: Nissan
12 Oct 2009It’s a ‘94 Nissan Sentra 5-speed manual trans. I had the clutch replaced two years ago, now with maybe 20,000 miles on it. Before having the clutch replaced, I had to replace the clutch control cable 3 times because each snapped at the bearing end (clutch pedal assembly side) from the pressure it took [...]
- (3) Comments
- Tags: Become, Causing, Clutch, Hard, Intermittently, Push, Stiff, What
About this site
In the 9th of May 2009, 1800AutoPart make over this site to be place where you can make a question where or how you should buy auto parts or parts replacement for your cars or motorcycles
Premium Advertiser
Categories
- JimF: High beam filament is blown [...]
- Bart S: ummm aaahhh burnt out headlight bulb? the headlight bulb has 2 filaments , one for the low beam a [...]
- melinda p: www.partstore.com [...]
- Free Smartphone Software: trd [...]
- dvskv: I recommend using onIy genuine Toyota parts if you plan on keeping your Toyota for life, and truthfu [...]
- I Have A 02 Kawasaki Ninja 250 Just Today My Brights Won’t Work, My Regular Lights Do Whats Wrong?
- Where Can I Find Tuner Parts For A Toyota Corolla?
- Kawasaki Ninja 250 Cc 2006, Oil Indicator Is On When Key Inserted. Is It Normal ?
- Motor Swap And Ef8 Rhd Question!!?
- What Does A Tune Up Consist Of For A 1999 Toyota Corolla?
- What Motor Swap Should I Go With?
- First Car?
- Can A Kawasaki Ninja 250 Fit Two People And Still Handle Highway Speeds?
- 91 Crx Motor Swap!! Ef8??
- Best Way To Start Tuning A Car?
Recent Terms
Car has trouble starting and a high idle volvoReplace ball joints on 95 ford ranger
Marine electric fuel pump shut off trouble
1998 audi a4 headlights problem
1998 audi a4 headlights not working
Where is the starter on a 2003 jeep cherokee
Steering wheel sound
Dpfe sensor 96 ford explorer
Water in oil pan head gasket
1993 jeep cherokee tachometer not working
Throttle position sensor ford focus 2009
Where to get brakes done at
Chevy venture power steering noise
Badthrottlebody
Oil filter 2010 corolla
Diagram of 2006 ford taurus body
Honda oddyssey brake light fuse
Oil pressure audi aah cold no pressure
1981 honda cm400e tires
Car and wont and start and shaking and smoke
